Protect America Simon XT Installation Manual download pdf (Page 54)

48 Simon XT Installation Manual

Function

Default

Description

HW1 function

Determines how the HW1 I/O output will function:

Off = no output

1 = interior siren output

2 = output activated when armed

3 = output activated when disarmed

4 = fail to communicate output, activates when fail to

communicate condition occurs (the fail to communicate option

must be on)

5 = alarm output activated when panel is in alarm

24-hour clock

Off

Determines whether the panel uses a 24-hour clock (on), or a

12-hour clock (off).

Siren options

Table 21 below describes the Siren Options menu.

Table 21: Siren Options menu

Function

Default

Description

Piezo beeps

Determines whether the panel piezo produces beeps based

on system activity (on), or is silent (off).

Panel voice

Determines whether the panel announces arming level

changes (on), or not (off).

Panel piezo

alarm

Determines whether the panel piezo emits alarm sounds (on),

or not (off).

Trouble beeps

Determines whether the panel and hardwired interior sirens

sound six beeps every minute when a trouble condition

occurs (on), or not (off). The following conditions cause

trouble beeps: AC power failure (when AC power failure

report is on) low CPU battery, sensor failure (supervisory),

sensor trouble (low battery, tamper, etc.), fail to communicate,

restoration of power, no activity timer has timed out (trouble

beeps continue for 5 minutes and if the panel does not see

activity, trouble beeps stop and the panel reports no activity to

the central station).

You can silence trouble beeps by arming or disarming the

system or by pressing the STATUS button. Trouble beeps

resume later if the trouble condition is not cleared.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 73 74

Comments to this Manuals

No comments

Protect America Simon XT Installation Manual Page 54

Comments to this Manuals

Related products and manuals for Security access control systems Protect America Simon XT