Protect America Simon XT Installation Manual download pdf (Page 51)

Simon XT Installation Manual 45

Nonalarms include: Latchkey, No Activity, Openings, Closings, Fail-to-Open, Fail-

to-Close, Force Armed, AC Power Failure, CPU Low Battery, and Trouble

Restoral.

Timers

Table 18 below describes the Timers menu.

Table 18: Timers menu

Function

Default

Description

Latchkey time

Off

Determines whether the panel reports a latchkey alarm if

the system is not disarmed at a preset time between

midnight and 11:59 p.m. (on). If the latchkey feature is

disabled (off), the panel will not report a latchkey alarm. The

system clock must be set for the latchkey feature to work.

Entry delay

030 seconds

Determines how much time you have to disarm the system

after entering the armed premises through a designated

delay door, before an alarm occurs. Beeps sound during the

entire delay time to remind you to disarm the system. When

turned on, the entry delay can be set from 030 to 240

seconds.

Exit delay

060 seconds

Determines how much time you have to leave the premises

through a designated delay door after arming the system.

Beeps sound after arming the system to remind you to

leave the armed premises. If a delay door is opened after

the exit delay expires, the entry delay begins. If you arm the

system with no delay and open a delay door after the exit

delay expires, an alarm occurs.

No activity tm

Off

Determines whether the panel sends a no activity report to

a central station when the programmed time elapses (on),

or if the feature is disabled (off). No activity means the

control panel, remote handheld, and key-chain touchpad

buttons have not been pressed and sensors have not been

tripped within a specified time (except sensors in group 25).

The timeout can be set from 02 to 24 hours.

Auto phone test

Off

Determines whether the panel automatically performs a

periodic phone test (on), or not (off). The test interval can be

from 001 to 254 days. The time of day the panel performs

the test is determined by the supervisory time, which must

be turned on for this feature to work.

Supervisory time

12:00am

Determines when the panel reports supervisory conditions

(sensor failures) and automatic phone tests to the central

station. The panel clock must be set to the correct time for

this option and the automatic phone test to work correctly.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 73 74

Comments to this Manuals

No comments

Protect America Simon XT Installation Manual Page 51

Comments to this Manuals

Related products and manuals for Security access control systems Protect America Simon XT